Advertisement
Touch Display Connections
1. Connect a video cable from your host computer to the monitor. For VGA cables, tighten the video cables
screws for best performance.
2. Connect the USB touch cable between the monitors USB connector and your PC's USB port. (Not
applicable for No Touch models)
3. Connect the power cable to the monitors input power jack and the AC power outlet.
4. The touch display ships in the ON state.
Installing the Touch Technology Software Drivers
No additional drivers are required for your projected-capacitive touch display with Windows 7 and 8 operating systems, it uses Windows HID drivers.
To download latest touch drivers:
1. Visit www.elotouch.com/Support/Downloads/Driver/DriverDownload/Default.aspx
2. Select the operating system from "Operating System" dropdown menu.
3. Select the technology from "Technologies" dropdown menu.
4. Click on the driver version required for your touch display.
5. Click "Accept" once you are directed to the "Driver License Agreement" page.
6. Enter you email address, Click on "Next Step". Your driver download will start automatically.
7. If you are a new user, fill in the required information and Click on "Register". Your driver download will start automatically.
User Manual – 32/42/43/5543L Series IDS
SW601960 Rev. F, page 6 of 31
Advertisement
