Related Manuals for Elo Touch Solutions Elo 3202
Summary of Contents for Elo Touch Solutions Elo 3202
- Page 1 Installation Guide Wall Mount Kit for Elo 3202/4202/4602 IDS Monitors Revision A P/N UM600076...
-
Page 2: Safety Warning
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes. -
Page 3: Kit Contents
Kit Contents (Landscape and portrait installation templates, dimensional drawings, and the below hardware) Upper Display Bracket, (x1) Lower Display Bracket, (x2) Upper Wall Bracket, (x1) Lower Wall Bracket, (x1) ECM Spacer, (x4) M6X34 Phillips head screw (x8) For IDS with ECM M6X8 Phillips head screw (x8) For IDS without ECM M4X10 Phillips head screw (x2) - Page 4 Step 1: Remove the four (4) VESA mount covers to expose the wall mount bracket mounting pads. These covers are not reused with this wall mount kit. Step 2: For mounting an IDS in landscape orientation, go to step 3a. For mounting an IDS in portrait orientation, go to step 3b.
- Page 5 Step 3a: Attach upper and lower display brackets (Landscape orientation) • Secure the upper display bracket to the upper mounting pads using four M6x8 screws. • Secure each of the lower display brackets to the other two mounting pads using two M6x8 screws.
- Page 6 Step 3b: Attach upper and lower display brackets (Portrait orientation) • Secure the upper display bracket to the upper mounting pads using four M6x8 screws. • Secure each of the lower display brackets to the other two mounting pads using two M6x8 screws.
- Page 7 Step 3c: Attach upper and lower display brackets (Landscape orientation with ECM) • Secure the upper display bracket to the upper mounting pads using two ECM spacers and four M6x34 screws. • Secure lower display brackets to the other two mounting pads using one ECM spacer and two M6x34 screws.
- Page 8 Step 3d: Attach upper and lower display brackets (Portrait orientation with ECM) • Secure the upper display bracket to the upper mounting pads using two ECM spacers and four M6x34 screws. • Secure lower display brackets to the other two mounting pads using one ECM spacer and two M6x34 screws.
- Page 9 Step 4: Attach upper and lower wall brackets (All configurations) • The upper wall bracket must be secured with four 1/4” or M6 screws. • The lower wall bracket must be secured with two 1/4” or M6 screws. • The wall mount kit includes screws for wood and metal stud walls, concrete, and solid wood. Both brackets must be mounted to structurally sound parts of the wall.
- Page 10 Step 5: Attach IDS Display to wall brackets (all configurations) • Elo recommends at least two people lift the IDS display onto the wall mount brackets. • Tilt the monitor slightly back while lifting it onto the upper wall bracket. Ensure both pivot screws on the upper monitor bracket are engaged in the hooks on the upper wall bracket.
- Page 11 Step 6: Secure IDS Display to lower wall bracket (all configurations) • Use a long Phillips head screw driver to tighten the M4 screws from the bottom side of the IDS display when mounted in landscape orientation. (Portrait mounted IDS Displays require access from the left and right side) Tighten both screws to secure the IDS Display...
- Page 12 Removing the IDS Display from the wall bracket (all configurations) • Use a long Phillips head screw driver to loosen the M4 screws from the bottom side of the IDS display when mounted in landscape orientation. (Portrait mounted IDS Displays require access from the left and right side) •...
Need help?
Do you have a question about the Elo 3202 and is the answer not in the manual?
Questions and answers