Parallel Connection Of A Proprietary Telephone And Single Line Telephone (Paralleled Telephone Connection); Mixed Station Dialing - Panasonic KX-TD816 Operating Instructions Manual

1.7 Useful Features
Parallel Connection of a Proprietary Telephone and Single Line
Telephone (Paralleled Telephone Connection)
Any extension connected to extension jacks 01 through 16 can be connected in parallel with a
proprietary telephone and a single line telephone. In the event of a power failure, CO1 and
CO4 can be accessed using the single line telephones that are connected in parallel with the
proprietary telephones to extension jacks 01 and 09 respectively. If the extension receives a
call, ringing will be heard from the proprietary telephone and the single line telephone. You
can answer the call by using either the proprietary telephone or the single line telephone. An
answering machine, facsimile, MODEM (personal computer), etc., can be connected instead
of a single line telephone.
System Programming is required to enable this feature.
!
!
PT • A proprietary telephone LCD will show you a single line telephone is in use.
SLT • The following features will not work with a single line telephone connected in parallel with
SLT • A single line telephone connected in parallel with a proprietary telephone cannot make a call
SLT • A single line telephone connected in parallel with a proprietary telephone will not ring in the
• See the Installation Manual, Section 3, "Paralleled Telephone Connection".

Mixed Station Dialing

Any telephone, either a KX-T7033/KX-T7030/KX-T7020/KX-T7050/KX-T7055/KX-T7330/
KX-T7320/KX-T7350/KX-T7130, single line rotary phone (10 pps, 20 pps) or single line
touch tone telephone, may be used as an extension for the system.
1-78
Operations
Technical Manuals Online! - http://www.tech-man.com
a proprietary telephone.
Call Splitting
External Feature Access
Account code input
Conference
Pickup dialing
in the following cases.
— The proprietary telephone is set to the BGM mode.
— The proprietary telephone is receiving a page through the built-in speaker.
— The proprietary telephone is set to the PROGRAM mode.
following cases.
— The proprietary telephone is set to Handsfree Answerback.
— The proprietary telephone is set to "Voice Call" in the Intercom Alert Assignment.