Canon 2541C001 Operation Manual page 94

Important
• When [H.264(1)] or [H.264(2)] video is used for memory card recording and upload, the following restrictions apply to the setting.
– [Bit Rate Control]: [Use bit rate control (constant bit rate)] only
– [Target Bit Rate (kbps)]: [3072] or less
– [I Frame Interval (sec)]: either [0.5], [1], or [1.5]
• When dual streaming H.264 videos, setting the video size for H.264(1) and H.264(2) to the following combinations restricts the frame
rate to a maximum of 15 fps. For all other combinations, a frame rate of up to 30 fps can be selected.
H.264(1)
1920 x 1080
All sizes
1280 x 960
1280 x 720
H.264(2)
Settings for H.264(2) video transmitted from the camera.
The video sizes that can be selected depend on the [Video Size Set] setting.
[H.264(2)]
Select [Enable] to dual stream H.264 video.
[Video Size], [Bit Rate Control], [Target Bit Rate (kbps)], [Video Quality], [Frame Rate (fps)], [I Frame Interval (sec)]
Please refer to each setting in "H.264(1)".
H.264(2)
All sizes
1920 x 1080
1280 x 960
1280 x 720
5
93