Canon 2541C001 Operation Manual page 213

S311 Working error in external input/output
service [err]
Description
%1
%2
%3
Meaning
Countermeasure
S312 Working error in timer service [err]
Description
%1
%2
%3
Meaning
Countermeasure
S320 PAN/TILT operation error [err]
Description
%1
%2
Meaning
Countermeasure
S410 Event service initialization error [crit]
Description
%1
%2
Meaning
Countermeasure
212
cannot work extio [%1][%2][%3]
(S311)
Error number
Cause of error
Error information
An error occurred while the external
input/output device service was
running.
If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
cannot work timer [%1][%2][%3]
(S312)
Error number
Cause of error
Error information
An internal error occurred in the timer
service.
If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
%1 error occurred. [%2] (S320)
PAN | TILT
Warning details
An error occurred during operation or
stopping of PAN/TILT.
Check that the camera is not touching
the dome, etc.
If the error is not caused by problems
such as contact with peripheral items,
the camera is faulty. Arrange for
servicing.
event initialization error [%1][%2]
(S410)
Error number
Cause of error
An error occurred in the initialization of
the event service.
If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
S411 External input/output service
initialization error [crit]
Description extio initialization error [%1][%2]
(S411)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of
the external input/output device
service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
S412 Timer service initialization error [crit]
Description timer initialization error [%1][%2]
(S412)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of
the timer service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
S413 Timer service runtime error [crit]
Description timer working error [%1] (S413)
%1 Error number
Meaning An error occurred while the timer
service was running.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
S420 External IO controller has failed [crit]
Description external io controller is broken.(S420)
Meaning The external IO controller has failed.
Countermeasure The external IO controller firmware
must be updated. If the problem
persists after updating the firmware,
the camera is faulty. Arrange for
servicing.