Canon 2541C001 Operation Manual page 164

Configure the detection criteria.
5
Set criteria in the video display area or [Detection Conditions] tab (P. 165). The detection criteria differ according
to the detection type.
Configure event settings.
6
Set which operations to carry out for video detection in the [Event] tab (P. 178).
To register multiple detection settings, repeat steps 2 to 6.
7
Click [Apply].
8
The settings are saved to the camera.
Note
To restore settings, click [Clear] before applying. This discards the settings you have specified and restores the settings saved in
the camera. However, note that detection settings only added to the detection setting area by clicking [Add] are all discarded.
Check the detection result.
9
You can check the detection status of the specified detection settings in video display area, the [Event] column in
[Detection Settings] or the [Event and Input/Output] menu in the Camera Viewer (P. 72).

Setting a Non-Detection Area
You can set an area where changes are not detected, to prevent mis-detection and non-detection.
5
163