Instruction Sheet - Fluke i6000s Flex-24 Instruction Sheet

Introduction
The i6000s 24 Flex and i6000s 36 Flex AC Current Probes
(hereafter referred to as "the Probes") are used with
oscilloscopes, digital multimeters, recorders or data loggers. The
Probes can be used to measure AC current up to 6000 A. The
flexible measuring head allows current measurements on
conductors that are hard to reach or inaccessible using typical
clamp-on current probes.
The Probes provide a low-voltage (3 V ac) output that is
proportional to the current being measured. The Probes provide
full-scale direct readings for 60 A, 600 A, and 6000 A.
Symbols
The following table shows the symbols used on the product
and/or in this manual.
Symbol
~
W
X
T
-
P
>
;
PN 2842359
June 2007
©2007 Fluke Corporation. All rights reserved. Printed in China.
Do not dispose of this product as unsorted municipal
waste. Go to Fluke's website for recycling information.
Important Information. Refer to the manual.
Hazardous Voltage. Risk of electric shock.
Double/Reinforced insulation.
Do not apply around or remove from the HAZARDOUS
LIVE conductors.
Complies with the relevant European standards.
Conforms to Underwriters' Laboratory, Inc.
Conforms to Australian standards.
i6000s Flex
AC Current Probe

Instruction Sheet

Description
®