Fluke FEV-CON-TSL Safety Information

Introduction

The FEV-CON-TSL (the Product) is high-quality accessory to test the
function and safety of charging equipment for electric vehicles. This
accessory is for use with with the Fluke FEV100 EV Charging adapter.
Tesla™ is a registered trademark of Tesla, Inc.
Safety Information
A Warning identifies conditions and procedures that are dangerous
to the user. A Caution identifies conditions and procedures that can
cause damage to the Product or the equipment under test.
To prevent the possibility of electric shock or personal injury:
• Read all safety information before you use the Product.
• Do not alter the Product and use only as specified, or the
protection supplied by the Product can be compromised.
• Carefully read all instructions.
• Do not use the Product if it operates incorrectly.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
• Limit operation to the specified measurement category,
voltage, or amperage ratings.
• Do not exceed the Measurement Category (CAT) rating
of the lowest-rated individual component of a Product,
probe, or accessory.
• Comply with local and national safety codes. Use
personal protective equipment (approved rubber
gloves, face protection, and flame-resistant clothes) to
prevent shock and arc blast injury where hazardous live
PN 5361946, May 2022
© 2022 Fluke Corporation. All rights reserved.
Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
FEV-CON-TSL
Test Plug For Tesla™ Station
Safety Information
WX Warning