Evm Procedure; Connections Of The Ev2400 Kit - Texas Instruments bq50002 User Manual

www.ti.com
6.2.6 EV2400 Set Up
Connect J4 to EV2400 kit by 4-pin cable. Connect the USB port of the EV2400 kit to the USB port of the
computer. The connections are shown in
6.2.7 Connector
A USB mini cable with red (+) and black (–) banana plugs and green/white wires shorted together. Note
red lead will connect to pin 1 and black lead will connect to pin 5. Test cable should be 6- to 12-in long.
6.3

EVM Procedure

6.3.1 Set Input Voltage
Verify that the power supply is adjusted and connected according to
settings are completed according to
SLVUAJ7 – October 2015
Submit Documentation Feedback
Figure 2.
To Computer
USB Port
4-Pin Cable
to EVM
Figure 2. Connections of the EV2400 kit
Section 6.2.4.
Copyright © 2015, Texas Instruments Incorporated
Section 6.1.2. Verify that the jumper
bq50002 Wireless Power TX EVM
Test Setup
13