Master Appliance Ultratorch UT-100SIK Instruction Manual page 10

Optional Accessories UT-200Si
Soldering Tips
72-01-01
3mm dia. tapered needled soldering tip
72-01-02
10mm dia. chisel soldering tip
72-01-03
4mm dia. spade soldering tip
Heat Tips
72-01-51
5.6 O.D./3.6 I.D. (mm)
Heat Shrink
Attachment
72-01-55 (std)
Heat Shrink
Attachment
72-01-54
Ultratane™ Butane
"ULTRA-REFINED" by Master...the only approved butane for Ultratorches.
• Single piece universal tip
• Purest refining method possible
• Special non-clogging formula to permit extended use
72-01-05
1.5mm dia. tapered needle soldering tip
72-01-06
4mm dia. micro spade soldering tip
72-01-07
1.5mm tapered pyramid soldering tip
72-01-52
8.8 O.D./6.6 I.D. (mm)
Carrying Strap
72-52U
72-01-11
7mm dia. chisel soldering tip (std)
72-01-12
4mm dia. chisel soldering tip
72-01-13
12.5mm dia. spade soldering tip
72-01-14
soldering tip adaptor
(5mm dia. x 0.8mm pitch)
72-01-53
11.5 O.D./9.7 I.D. (mm)
Protective Cap
P/N 51773 - 5.125 oz.
P/N 10448 - 26gm. canisters
Outside diameter
Inside diameter
78-02