Table of Contents
Advertisement
TAKING CARE OF UNEXPECTED PROBLEMS
NO POWER AT THE AC RECEPTACLES
Possible Cause
Output indicator is OFF , and
overload indicator is ON.
Overload indicator blink.
GFCI system activated.
Faulty power tool or appliance.
Faulty generator.
Correction
Check AC load. Stop and restart
the engine.
Check the cooling air inlet. Stop
and restart the engine.
Take the generator to an
authorized Honda servicing
dealer, or refer to the shop
manual.
• GFCI receptacle
(120 V 20 A duplex receptacle):
Test GFCI and press the RESET
button (see page 27).
• Replace or repair power tool or
appliance.
Replace or repair power tool or
appliance.
Stop and restart the engine.
Take the generator to an
authorized Honda servicing
dealer, or refer to the shop
manual.
59
Advertisement
Table of Contents
