Initial Use Instructions; Engine Oil - Honda EB2200ITAN Owner's Manual

INITIAL USE INSTRUCTIONS

ENGINE OIL

The generator is shipped WITHOUT OIL in the engine.
1. Place the generator on a level surface.
2. Loosen the maintenance cover screw and remove the maintenance
cover.
MAINTENANCE COVER
3. With the generator in a level position, remove the oil filler cap.
4. Add enough SAE 10W-30 API service category SJ or later (or
equivalent) oil to bring the oil level to the upper limit of the oil filler
neck. SAE 10W-30 oil is recommended for general use; for
additional recommendations, see page 42.
Maximum oil capacity: 14 oz (0.44 L)
Do not overfill the engine with oil. If the engine is overfilled, the
excess oil may be transferred to the air cleaner case and air filters.
5. Screw in the oil filler cap securely.
OIL FILLER CAP
6. Reinstall the maintenance cover and tighten the maintenance cover
screw securely.
MAINTENANCE
COVER SCREW
OIL FILLER NECK
UPPER LIMIT
LOWER LIMIT
79