Refueling The Machine - Wacker Neuson E1100 Operator's Manual

Hydronic surface heater
Table of Contents

Advertisement

E 1100
4.10

Refueling the Machine

Requirements
Machine shut down
Machine level with the ground
Diesel fuel supply
Procedure
Perform the procedure below to refuel the machine.
Note: On models with generators, it is not necessary to fill the generator's fuel
tank. Both the burner and the generator use the machine's fuel tank.
1. Lift the lever (a) on the fuel cap.
2. Rotate the lever counterclockwise until it stops.
3. Remove the fuel cap from the tank.
4. Fill the tank with the appropriate grade of fuel for the weather conditions until the
gauge (b) reads full. Leave room within the tank for possible fuel expansion.
CAUTION
Fire and health hazard. Fuel expands when heated. Expanding fuel in a overly-full
tank can lead to spills and leaks.
Do not overfill the fuel tank.
5. Reinstall the fuel cap.
wc_tx001903gb.fm
a
wc_gr008446
wc_gr008448
43
Operation
wc_gr008447
b
wc_gr008721

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E1100 dg50006201725200001676

Table of Contents