Refueling The Machine - Wacker Neuson HDR115 Operator's Manual

HDR 115
4.3

Refueling the Machine

■ Machine shut down
Requirements
■ Engine cool
■ Machine/fuel tank level with the ground
■ Fresh, clean fuel supply
Procedure Perform the procedure below to refuel the machine.
WARNING
Fire hazard. Fuel and its vapors are extremely flammable. Burning fuel can cause
severe burns.
► Do not refuel while heater is in operation.
► Do not refuel if heater surface is hot.
► Keep all sources of ignition away from the machine while refueling.
► Do not refuel if the machine is positioned in a truck fitted with a plastic bed liner.
Static electricity can ignite the fuel or fuel vapors.
► Refuel only when the machine is outdoors.
► Clean up spilled fuel immediately.
1. Remove the fuel cap (a).
Note: It is recommended to place the fuel cap into the fuel cap holder (b) to keep
the cap clean from debris which could affect the fuel gauge reading.
a
2. Fill the fuel tank to the base of the neck.
CAUTION
Fire and health hazard. Fuel expands when heated. Expanding fuel in an over-filled
tank can lead to spills and leaks.
► Do not overfill the fuel tank.
3. Re-install the fuel cap.
Result The procedure to refuel the machine is now complete.
wc_tx004174gb_Fm10.fm
b
wc_gr013061
27
Machine Setup