Maintenance And Cleaning Instructions; Maintenance; Cleaning - UFO UK User Manual

8.1 Maintenance

Attention! Careful and regular maintenance of UFO infrared heater considering these instructions
assume great importance so as to attain a long and efficient operation of your heater.
1- Check the filthiness of the reflector and IR – filament at least once a month. If necessary, apply
cleaning and maintenance instructions.
2- The frequency and number of maintenance check must be adjusted by considering the operating
environment of the heater. Outdoor use or dusty environment requires more maintenance.
3- At each maintenance, check for visually deformation of the reflector, grid and heater frame.
In case of any deformation, consult to your technical service.
4- Check the power cord and plug visually while cleaning the appliance. In case of any deformation,
consult to your technical service.
5- It is recommended to clean regularly the reflector of your heater to ensure proper and efficient
operation.

8.2 Cleaning

Attention! Regular and careful cleaning helps your UFO Heater operate for longer years and more
efficiently.
1- Before any maintenance or cleaning of your heater, be sure to unplug the power cord for your
safety.
2- To clean the reflector or the element of your UFO infrared heaters remove the grid of the unit.
To do so, unscrew the plastic cover of the housing using a star screwdriver (Philips).
Subsequently, drag plastic covers, finishing trim and grid to the outside of the frame by
following the guidelines of the extrusion.
3- The reflector and filament must be cleaned with a soft cloth, a smooth brush or dry air.
The cloth may be damp but never too wet and the cleaner should not include any chemical.
4- Never use abrasive or chemical cleaner so as not to damage your heater.
5- After the cleaning, be sure to reinstall properly the grid of the unit using a slotted screwdriver.
All manuals and user guides at all-guides.com

8. MAINTENANCE AND CLEANING INSTRUCTIONS

UFO user manual 17