Compaq A900 User Manual page 72

NOTE: The Industry Canada label identifies certified
equipment. This certification means that the equipment
meets certain telecommunications network protective,
operational, and safety requirements. The Department
does not guarantee the equipment will operate to the
user's satisfaction.
Before installing the equipment, users should ensure
that it is permissible to be connected to the facilities of
the local telecommunications company. The
equipment must also be installed using an acceptable
method of connection. In some cases, the company's
inside wiring associated with a single line individual
service may be extended by means of a certified con-
nector assembly (telephone extension cord). The
customer should be aware that compliance with the
above conditions may not prevent degradation of
service in some situations.
Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated
by the supplier. Any repairs or alterations made by the
user to this equipment, or equipment malfunctions,
may give the telecommunications company cause to
request the user to disconnect the equipment.
Users should ensure for their own protection that the
electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe
system, if present, are connected together. This
precaution may be particularly important in rural areas.
8VHUVýVKRXOGýQRWýDWWHPSWýWRýPDNHýVXFK
FRQQHFWLRQVýWKHPVHOYHVñýEXWýVKRXOGýFRQWDFWýWKH
DSSURSULDWHýHOHFWULFýLQVSHFWLRQýDXWKRULW\ýRUýDQ
HOHFWULFLDQï
NOTICE: The Ringer Equivalence Number (REN)
assigned to each terminal device provides an indication
of the maximum number of terminals allowed to be
connected to a telephone interface. The termination on
an interface may consist of any combination of
devices, subject only to the requirement that the sum
of the Ringer Equivalence Numbers of all the devices
does not exceed 5.
The Ringer Equivalence Number (REN) for this
device is 0.7B.
For the location of the authorized Canadian
maintenance facility nearest you, call 1-800-263-5868
or contact:
&RPSDTý&DQDGDñý,QFï
éèý9RJHOOý5RDG
5LFKPRQGý+LOOñý2QWDULRýý/$è%ýê3ç
Retain the product's safety and operating instructions
for future reference. Follow all operating and usage
instructions. Observe all warnings on the product and
in the operating instructions.
To reduce the risk of fire, bodily injury, and damage to
the equipment, observe the following precautions.
xý Damage Requiring Service
Unplug the product from the electrical outlet
and take the product to a Compaq authorized
service provider under the following conditions:
The power cord, extension cord, or plug is
zý
damaged.
Liquid has been spilled or an object has fallen
zý
into the product.
The product has been exposed to water.
zý
The product has been dropped or damaged in
zý
any way.
There are noticeable signs of overheating.
zý
The product does not operate normally when
zý
you follow the operating instructions.
xý Servicing
Except as explained elsewhere in the Compaq
documentation, do not service any Compaq
product yourself. Opening or removing covers
that are marked may expose you to electric
shock. Service needed on components inside
these compartments should be done by a
Compaq authorized service provider.
xý Mounting Accessories
Do not use the product on an unstable table,
cart, stand, tripod, or bracket. The product may
fall, causing serious bodily injury and serious
damage to the product. Use only with a table,
cart, stand, tripod, or bracket recommended by
the manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer's instructions, and should use a
mounting accessory recommended by the
manufacturer.