Table of Contents
Advertisement
Remove the paper from paper input tray.
1.ý
Lift the envelope positioning tab that is inset in the
2.ý
right side of the paper input tray.
Load envelopes to the right (viewed from front)
3.ý
against the envelope positioning tab. The side you
will be printing on should be facing you.
Squeeze and slide the paper guide so that it touches
4.ý
envelopes.
Set up the application to print on the size of
5.ý
envelope loaded. You can set up the print size from
the
button of the
Print the envelope(s).
6.ý
When printing is complete
Put the envelope tab back into its storage position.
1.ý
Replace the printer paper in paper input tray.
2.ý
Squeeze and slide the paper guide so that it touches
3.ý
the paper.
In front of the paper input tray is the manual feed. Use the
manual feed for printing on different paper than is loaded
in the paper input tray.
NOTE: If any paper is loaded in the manual feed tray
when a print job is started, that paper will be used instead
of the paper loaded in the main paper input tray.
Set up the application to print on the type of the paper in
the manual feed tray. To change the paper type:
Æ Æ Æ Æ
Select
1.ý
or
Click the
icon in your application.
dialog box.
Click the
button of the
2.ý
Select
3.ý
Select the size and type of paper installed in the
4.ý
manual feed tray.
Click
5.ý
dialog box.
Advertisement
Table of Contents
