Table of Contents
Advertisement
The Compaq A900 All-In-One offers three ways to
send a fax:
xý Using the control panel
xý Using the Compaq Control Form
xý Using the computer
Until you are ready to send or receive a fax, the LCD
panel on the control panel displays READY.
You can use the A900 to fax documents that are
printed on standard letter, legal, or A4-sized paper.
Follow these guidelines to prepare your documents.
For the following types of documents, use the
Copy/Scan Sleeve:
Envelopes
zý
Checks
zý
Receipts
zý
Fragile or thin documents
zý
Photographs
zý
Wrinkled or creased paper
zý
Curled or rolled paper
zý
Torn paper
zý
Carbon or carbon-backed paper
zý
Coated or glossy paper
zý
Onion skin or thin paper
zý
xý Remove all staples, paper clips, and similar
items before feeding the document.
xý Make sure any glue, ink, or correction fluid on
the paper is completely dry before feeding the
document.
Place the document(s) to be faxed face down
1.ý
and top down in the document input tray.
Adjust the document guides to match the width
2.ý
of the document, if necessary.
Slide the document down into the tray until the
3.ý
machine grips the first sheet. The lower LCD
panel displays the message:
To send a fax using the control panel, complete the
following steps.
Load the documents as described above.
1.ý
Press the
button.
2.ý
The following displays on the LCD panel:
Enter the fax number using the numeric keys.
3.ý
Pressing the
number inserts a "P" into the number. When the
All-In-One dials, the "P" results in a three-second
delay before sending the next digit. This is useful
when you have to dial a number and wait for an
outside line. (For example, 9P5551212)
Press
4.ý
The All-In-One dials the entered fax number and
the document transmits.
button when entering a
Advertisement
Table of Contents
