Download Print this page
eTIGER ES-S7A Manual

eTIGER ES-S7A Manual

Outdoor siren
Hide thumbs Also See for ES-S7A:

Advertisement

Quick Links

ES-S7A
Outdoor Siren
EN
www.etiger.com
Instrukcja pobrana ze sklepu www.ekocentrum24.pl

Advertisement

loading
Need help?

Need help?

Do you have a question about the ES-S7A and is the answer not in the manual?

Questions and answers

Summary of Contents for eTIGER ES-S7A

  • Page 1 ES-S7A Outdoor Siren www.etiger.com Instrukcja pobrana ze sklepu www.ekocentrum24.pl...
  • Page 2: Box Content

    EEPROM information protection, power failure will not damage data Simplified accessory expansion easy connection Compatible with every eTiger wireless accessory Silent at night Box Content 1 x ES-S7A 1 x 12V Adaptor 1 x Backup Battery (built-in) 1 x User Manual...
  • Page 3: General Information

    S7A can be registered in the control panel of your alarm system. When your alarm system detects an intrusion, the ES-S7A rings out and its strobe lights turn on. The ES-S7A can also be used as a standalone alarm system by registering wireless accessories in the siren. Layout...
  • Page 4 Press the “Arm” button on the control panel. The built-in speaker of the control panel beeps and the LEDs of the ES-S7A turn on for 4 seconds: the connection is successful. If not, the connection has failed, try registering the siren again.
  • Page 5 The siren supports up to 20 wireless accessories. Test Press the “Arm” button of the remote control. The LEDs of the ES-S7A turn on for 4 seconds: the connection is successful. Trigger a sensor that is already connected to the siren, the siren will ring out.
  • Page 6: Specifications

    Clear all accessories It is recommended to clear every accessory from the siren if you were to lose one of them, especially if you have lost your remote control. Regardless the system is armed or disarmed, press and hold the Connect button until you hear 3 beeps (7 seconds): all accessories or contol panels connected have been cleared from the siren.
  • Page 7 Standards This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities.
  • Page 8 Images, illustrations and text are non-contractual. ETIGER and the ETIGER logo are registered trademarks and the property of ETIGER. Copyright © 2014 ETIGER. All rights reserved.
  • Page 9 This user manual is available in other languages at www.etiger.com/eu/support ETIGER EUROPE Rue de la Loi, 25, 7100 La Louvière, Belgium service@etiger.com...