Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for eTIGER ES-S7AU
Summary of Contents for eTIGER ES-S7AU
- Page 1 ES-S7AU Outdoor Siren www.etiger.com...
-
Page 2: Box Content
EEPROM information protection, power failure will not damage data Simplified accessory expansion easy connection Compatible with eTIGER Security Kits Silent at night Box Content 1 x ES-S7AU 1 x 12V Adaptor 1 x Backup Battery (built-in) 1 x User Manual... -
Page 3: General Information
S7AU can be registered in the control panel of your alarm system. When your alarm system detects an intrusion, the ES-S7AU rings out and its strobe lights turn on. The ES-S7AU can also be used as a standalone alarm system by registering wireless accessories in the siren. Layout... - Page 4 Press the “Arm” button on the control panel. The built-in speaker of the control panel beeps and the LEDs of the ES-S7AU turn on for 4 seconds: the connection is successful. If not, the connection has failed, try registering the siren again.
- Page 5 The siren supports up to 20 wireless accessories. Test Press the “Arm” button of the remote control. The LEDs of the ES-S7AU turn on for 4 seconds: the connection is successful. Trigger a sensor that is already connected to the siren, the siren will ring out.
-
Page 6: Specifications
Clear all accessories It is recommended to clear every accessory from the siren if you were to lose one of them, especially if you have lost your remote control. Regardless the system is armed or disarmed, press and hold the Connect button until you hear 3 beeps (7 seconds): all accessories or contol panels connected have been cleared from the siren. - Page 7 Standards This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities.
-
Page 8: Fcc Statement
(2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by eTIGER may void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. - Page 9 This user manual is available in other languages at www.etiger.com/us/support ETIGER USA 1500 Fashion Island Blvd. Suite 102, San Mateo, CA 94404, USA service@etiger.com...
Need help?
Do you have a question about the ES-S7AU and is the answer not in the manual?
Questions and answers