Billy Goat PLUGR Owner's Manual page 16

Maintenance
REPLACING INDIVIDUAL TINES
1. Wait for engine to cool and disconnect spark plug.
2. Loosen the jam nut then unscrew the tine.
3. Replace the tine making sure to use the maximum amount of threads on the tine.
Note: Tines are a normal wear item and should be inspected regularly for signs of wear or damage.
REPLACING THE TINE PLATE
1. Lower the tines.
2. Use the impact wrench fitted with a 1/2" socket to remove the 5/16" carriage bolts from the four corners
of the tine plate. This will detach the plate from the tine arms. See Figures AD and AE.
3. Unhook the engagement cable. See Figure AF. Slowly wiggle the plate out from the tines. See Figure
AG.
Part No. 382510
Figure AD
Figure AF
16
Figure AE
Figure AG
382510_B_HI