Billy Goat PLUGR Owner's Manual page 10

Maintenance
3. Loosen the inner pillow block bearings on each side of the tineshaft. Simultaneously, use the impact
wrench fitted with the 9/16" socket and the 9/16" wrench to remove the hardware from each pillow block
bearing. See Figures G-J. Note the heavy weight of the tineshaft.
Figure G Figure H
Figure I Figure J
4. Use the 1/4" curved Allen wrench to remove the top belt-guide-bolt. Do not remove the bottom belt-
guide-bolt. See Figure K. Note how the belt is positioned around the pulleys in the machine.
Figure K
Part No. 382510 382510_B_HI
10