Download Print this page

Advertisement

Quick Links

PL25H Owner's Manual
AERATOR Owner's Manual
PL2500H
U.S. PATENT #6892821
Replacement Parts
TINE REPLACEMENT
TINE BUSHING REPLACEMENTS
Replacement tip for aerating tines.
Replacement bushings for the tines
P/N 381057
P/N 380213
Part No 100382
1
Form No F072215B

Advertisement

loading

Summary of Contents for Billy Goat PL25H

  • Page 1 PL25H Owner’s Manual AERATOR Owner's Manual PL2500H U.S. PATENT #6892821 Replacement Parts TINE REPLACEMENT TINE BUSHING REPLACEMENTS Replacement tip for aerating tines. Replacement bushings for the tines P/N 381057 P/N 380213 Part No 100382 Form No F072215B...
  • Page 2: Table Of Contents

    PL25H Owner’s Manual CONTENTS SPECIFICATIONS INTENDED USE INSTRUCTION LABELS PACKING CHECKLIST & ASSEMBLY OPERATION MAINTENANCE TROUBLE SHOOTING AND WARRANTY INFORMATION ILLUSTRATED PARTS & PARTS LIST 10-11 Part No 100382 Form No F072215B...
  • Page 3: Specifications

    PL25H Owner’s Manual SPECIFICATIONS PL2500H Engine: cc 163cc Engine: Honda GX160 w/Gearbox Engine: Fuel Capacity 3.3 qt. (3.1 L) Engine: Oil Capacity 0.61 qt. (0.58 L) Total Unit Weight: 284# (128.8 Kg) 67.5” (1.7m) Length 32.5” (.83m) Width 41.25” (1m) Height Max.
  • Page 4: Intended Use

    PL25H Owner’s Manual INTENDED USE AERATOR This machine is designed for aerating established lawns and large grass covered areas. The machine should not be used for any other purpose than that stated above. DO NOT OPERATE IF EXCESSIVE VIBRATION OCCURS ! If excessive vibration occurs, shut engine off immediately and check for damaged or worn reel, loose reel bearing, loose engine or lodged debris.
  • Page 5: Instruction Labels

    INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT Aerator. If any labels are damaged or missing, replace them before operating this equipment. Part numbers from the Illustrated Parts List are provided for convenience in ordering replacement labels.
  • Page 6: Packing Checklist & Assembly

    PL25H Owner’s Manual PACKING CHECKLIST Your Billy Goat is shipped from the factory in one carton with the handles and cables detached. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box. PUT OIL IN ENGINE BEFORE STARTING PARTS BAG &...
  • Page 7: Operation

    PL25H Owner’s Manual OPERATION STARTING ENGINE See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gasoline. ENGINE SPEED: Controlled by lever on the engine. Under normal conditions, operate at the minimum throttle speed to accomplish your task.
  • Page 8: Maintenance

    PL25H Owner’s Manual MAINTENANCE NOTE: Items in ( ) can be referenced in the Parts Illustration and Parts List on pages 10-11. PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use Every 10 hrs...
  • Page 9: Trouble Shooting And Warranty Information

     The machine must be taken to the dealer from whom it was purchased or to an authorized Servicing BILLY GOAT Dealer. ...
  • Page 10: Illustrated Parts & Parts List

    PL25H Owner’s Manual PL2500H PARTS DRAWING Part No 100382 Form No F072215B...
  • Page 11 PL25H Owner’s Manual PL2500H PARTS LIST PL2500H PL2500H ITEM # PART # DESCRIPTION ITEM # PART # DESCRIPTION 381003-01 RUBBER LATCH KIT 381694 BUSHING 1/2" UD X 5/8" OD X 1" 8171003 WASHER 5/16" FLAT 381711 800 SERIES FRAME 380200 ENGINE PULLEY 3.5 DIA...