Ethernet/Ip™ Led Standard; Ethernet/Ip™ Object Model - Datalogic BC9 0 Series Software Reference Manual

ETHERNET/IP™ LED Standard
Table 2
Table 2. ETHERNET/IP™ supported LEDs
LED
Module Status
Network Status
ETHERNET/IP™ Object Model
Table 3
Table 3. Object Model data types
Data Type
USINT
UINT
UDINT
SINT
INT
DINT
STRING
SHORT STRING
STRINGI
BYTE
WORD
DWORD
REAL
Ethernet Software Reference Guide
below shows the LEDs supported by ETHERNET/IP™.
Color State
None Off
Red Solid
Flashing
Green Solid
Flashing
Red/Green Alternating
None Off
Red Solid
Flashing
Green Solid
Flashing
Red/Green Alternating
describes data types used in this Object Model.
Description
Unsigned Short Integer (8-bit)
Unsigned Integer (16-bit)
Unsigned Double Integer (32-bit)
Signed Integer (8-bit)
Signed Integer (16-bit)
Signed Integer (32-bit)
Character String (1 byte per character)
nn Character String (1
nn
International String format
Bit String (8-bits)
Bit String (16-bits)
Bit String (32-bits)
IEEE 32-bit Single Precision Floating Point
Indicates
No Power
Unrecoverable fault
Recoverable fault
Normal runtime operation
N/A
Self test
No power / No Ethernet Link
Unrecoverable fault
Recoverable fault or I/O connection
timed out
Normal runtime operation (I/O Con-
nection Allocated)
Device is idle or is not allocated to a
Client (PLC)
Self test
st
byte is length; up to
characters)
ETHERNET/IP™ LED Standard
31