Summary of Contents for Datalogic BC90-STAR Series
Page 1
BC9XX0-STAR Base Station/Charger Quick Reference Guide...
Page 2
An Unpublished Work - All rights reserved. No part of the contents of this docu- mentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”). Owners of Data-...
Agreement. If you use the Datalogic Product, you will be deemed to have accepted the terms and conditions of this Agreement. If you do not intend to be bound to the terms of this Agreement, Datalogic is not willing to license the Software to you, you may not use the Datalogic Product or the Software, and you must contact the party from whom you acquired the Datalogic Product for instructions.
Page 6
Datalogic ADC, Inc., Legal Department, 959 Terry Street, Eugene, OR 97402. 7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End User the right to continue using the Datalogic Product, 2) modify the Datalogic Product so that it becomes non-...
11.2 Notice. All notices required or authorized under this Agreement shall be given in writing, and shall be effective when received, with evidence of receipt. Notices to Datalogic shall be sent to the attention of Contract Administration, Datalogic ADC, Inc., 959 Terry Street, Eugene, OR 97402, or such other address as may be specified by Datalogic in writing.
Page 8
Software Product Policy NOTES BC 9xx0 Cradle...
Using the BC9xx0 Base Station The BC9xx0 base station, when paired with one or more PowerScan™ PM9500 readers, builds a Cordless Reading System for the collection, decoding and transmission of bar code data. It can be connected to a Host PC via RS-232, USB, or KBD Wedge, and is suited for single-cradle layouts.
Installation Installation To set up your BC9xx0 cradle you must: Physically install the cradle. Make all system connections. Configure the BC9xx0 cradle. Mounting the BC9xx0 Cradle The cradle package contains the following items: • BC9xx0 Base Station (with Desktop • 1 Metal Mounting plate Mounting Bracket installed) •...
Mounting the BC9xx0 Cradle • Desktop mount bracket has ribs to keep the scanner in place when the cradle is horizontal • Wall mount bracket contains bosses to keep the scanner in place when the cradle is vertical. To change the Bracket: Remove the screw holding the Bracket in place.
Mounting the BC9xx0 Cradle Permanent Mounting For either desktop or wall mounting, the cradle can be fastened directly to a flat surface using screws (not included). When mounting on drywall, the base should be screwed to a wall stud or supporting beam for additional support. Figure 3.
Mounting the BC9xx0 Cradle Figure 4. Mounting Plate on Wall Attaching the Metal Plate to Base Alternatively, the mount can be attached first to the base, then both can be mounted to a wall as described above. Figure 5. Attaching Mounting Plate to Base Base with Mount attached Quick Reference Guide...
System Connections System Connections Connections should always be made with power off! CAUTION BC9x80 models - Ethernet Connection The BC9x80 models contain an Ethernet connector and a power supply con- nector. A multi-interface connector is also available (intended for service pur- poses only).
System Connections Non-Ethernet Connection The BC9xx0 cradle provides a multi-interface connector and a power supply connector as shown: Power Supply Multi-Interface Connector Connecting and Disconnecting the Multi-Interface Cable The BC9xx0 can be connected to a Host by means of a multi-interface cable, which must be simply plugged into the Host connector, visible on the front panel of the cradle.
(available for free download from the Datalogic website) is a multi-platform utility program that provides a quick and user-friendly con- figuration method via the RS-232/USB-COM or Ethernet interface. It also allows upgrading the software of the connected device (see the Datalogic ™ Aladdin Help On-Line for more details).
Selecting the Interface Type Configuration Bar Codes Link the cradle and the reader using the procedures described in the Power- ™ Scan PM9500 Quick Reference. Once the pairing is complete, you can config- ure the BC9xx0 cradle by reading the configuration bar codes in this manual. ™...
Page 18
Select Dynamic IP Addressing a. When Static IP Addressing is selected, 192.168.187.31 will be used as a default; this can be changed using the Datalogic Aladdin configuration program. b. To use Dynamic IP Addressing , you must be sure that your network system supports a DHCP server.
(can be used for OPOS/UPOS/JavaPOS) USB-OEM USB Keyboard with standard key encoding Select USB Keyboard USB Keyboard with alternate key encoding USB Alternate Keyboard USB Keyboard for Apple computers USB-KBD-APPLE a. Download the correct USB COM driver from www.datalogic.com Quick Reference Guide...
Selecting the Interface Type Keyboard Interface Use the programming bar codes to select options for USB Keyboard and Wedge Interfaces. KEYBOARD AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/ Standard Key Encoding Select KBD-AT Keyboard Wedge for IBM AT PS2 with standard key encoding but without external keyboard Select KBD-AT-NK AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 &...
Selecting the Interface Type KEYBOARD (continued) Keyboard Wedge for IBM Terminal 3153 Select KBD-IBM-3153 Keyboard Wedge for IBM Terminals 31xx, 32xx, 34xx, 37xx make only keyboard Select KBD-IBM-M Keyboard Wedge for IBM Terminals 31xx, 32xx, 34xx, 37xx make break keyboard Select KBD-IBM-MB Keyboard Wedge for DIGITAL Terminals VT2xx, VT3xx, VT4xx...
Selecting the Interface Type Country Mode This feature specifies the country/language supported by the keyboard. Only these interfaces support ALL Country Modes: • USB Keyboard (without alternate key encoding) • AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Std Key Encoding •...
Page 23
Selecting the Interface Type COUNTRY MODE (continued) Country Mode = Croatia* Country Mode = Czech Republic* Country Mode = Denmark* Country Mode = France $CKBCO13(CR) Country Mode = French Canadian Country Mode = Germany *Supports only the interfaces listed in the Country Mode feature description Quick Reference Guide...
Page 24
Selecting the Interface Type COUNTRY MODE (continued) Country Mode = Hungary* Country Mode = Italy Country Mode = Japanese 106-key* $CKBCO14(CR) Country Mode = Lithuanian Country Mode = Norway* Country Mode = Poland* Country Mode = Portugal* *Supports only the interfaces listed in the Country Mode feature description BC 9xx0 Cradle...
Page 25
Selecting the Interface Type COUNTRY MODE (continued) Country Mode = Romania* Country Mode = Spain Country Mode = Sweden Country Mode = Slovakia* Country Mode = Switzerland* *Supports only the interfaces listed in the Country Mode feature description Quick Reference Guide...
Selecting the Interface Type Caps Lock State This option specifies the format in which the reader sends character data. This applies to keyboard wedge interfaces. This does not apply when an alter- nate key encoding keyboard is selected. CAPS LOCK STATE ENTER/EXIT PROGRAMMING MODE Caps Lock State = Caps Lock OFF Caps Lock State = Caps Lock ON...
Selecting the Interface Type Numlock This option specifies the setting of the Numbers Lock (Numlock) key while in keyboard wedge interface. This only applies to alternate key encoding inter- faces. It does not apply to USB keyboard. NUMLOCK ENTER/EXIT PROGRAMMING MODE Numlock = Numlock key unchanged Numlock = Numlock key toggled Quick Reference Guide...
To change the defaults refer to the PowerScan 9500 PRG, or to the Datalogic ™ Aladdin Configuration program, both downloadable from the Datalogic web- site. Compatibility with the PowerScan™ 8000 family The BC9xx0 can be programmed to operate in a mode compatible with the PowerScan 8000 family.
Technical Features Technical Features Electrical Features Supply Voltage External Power 10 - 30 VDC Host Power 5 VDC ±10% Power Consumption External Power max. 10 W (charging) Host Power max. 500 mA (charging) Ext. Power/Data yellow LED Host Power/Data yellow LED Reader batt.
Page 30
Technical Features Regulatory (continued) IEC Class 2 Radiation 1 mW Avg., Emitted wavelength 650 nm, Laser Class Safety 12ms pulse, Beam Divergence 8.4 deg x 8.1 deg (“plus” pattern) Complies with FDA performance standards for laser products except for deviations pursu- ant to Laser Notice No.
FCC Compliance Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference which may cause undesired operation.
Waste Electrical and Electronic Equipment (WEEE) Statement English For information about the disposal of Waste Electrical and Electronic Equip- ment (WEEE), please refer to the website at www.datalogic.com. Italian Per informazioni sullo smaltimento delle apparecchiature elettriche ed elet- troniche consultare il sito Web www.datalogic.com.
Datalogic service center, with ship- ping charges prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Datalogic service center is located.
DAMAGES. Risk of Loss Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume risk of loss or damage for product in Datalogic’s possession. In the absence of spe- cific written instructions for the return of product to Customer, Datalogic will select the car- rier, but Datalogic shall not thereby assume any liability in connection with the return shipment.
Services and Support Services and Support Datalogic provides several services as well as technical support through its website. Log on to www.datalogic.com and click on the links indicated for fur- ther information. Products Search through the links to arrive at your product page where you can down-...
Page 37
Services and Support NOTES Quick Reference Guide...
Page 38
Services and Support NOTES BC 9xx0 Cradle...
Page 39
Lippo di Calderara di Reno (BO) 40012 Italy Pag.: 1 di 1 La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC Srl per: This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl for: Cette déclaration de conformité...