System Configuration Menu; Diagnostics Menu - HP Pavilion tx2000es Maintenance And Service Manual

System Configuration menu

Select
Language Support
Enhanced SATA support (select models only)
Boot Options
Button Sound (select models only)
Video memory up to (select models only)

Diagnostics menu

Select
Hard Disk Self Test
Secondary Hard Disk Self Test (select models only)
Memory Test
74 Chapter 5 Setup Utility
To do this
Change the Setup Utility language.
Enable/disable enhanced SATA mode.
Set the following boot options:
● f10 and f12 Delay (sec.)―Set the delay for the
f12 functions of the Setup Utility in intervals of 5 seconds
each (0, 5, 10, 15, 20).
CD-ROM boot―Enable/disable boot from CD-ROM.
●
Floppy boot―Enable/disable boot from Floppy.
●
Internal Network Adapter boot―Enable/disable boot
●
from Internal Network Adapter.
Boot Order―Set the boot order for:
●
USB Floppy
◦
ATAPI CD/DVD ROM Drive
◦
Hard drive
◦
◦ USB Diskette on Key
USB Hard drive
◦
◦ Network adapter
Enable/disable the Quick Launch Button tapping sound.
Select the amount of video memory.
To do this
Run a comprehensive self-test on the hard drive.
NOTE: On models with two hard drives, this menu option is
called the Primary Hard Disk Self Test.
Run a comprehensive self-test on a secondary hard drive.
Run a diagnostic test on the system memory.
f10 and