4.
Remove the fan (3).
Reverse this procedure to install the fan.
Heat sink
NOTE:
The heat sink spare part kit includes replacement thermal material.
Description
For use only on computer models equipped with discrete graphics subsystem
For use only on computer models equipped with UMA graphics subsystem
Before removing the heat sink, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Top cover (see
c.
Keyboard (see
Battery on page
35).
Hard drive on page
37)
Top cover on page
48)
Keyboard on page
50)
Component replacement procedures
Spare part
number
611499-001
611500-001
67