Hard drive
NOTE:
The hard drive spare part kit includes a hard drive bracket, hard drive connector, and Mylar
cover.
Description
640-GB, 5400-rpm
500-GB, 7200-rpm
320-GB, 7200-rpm
250-GB, 7200-rpm
Hard Drive Hardware Kit (includes hard drive bracket and hard drive screws)
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×5.0 captive screws that secure the hard drive cover to
the computer.
Battery on page
35).
Component replacement procedures
Spare part number
611495-001
584381-001
584380-001
584379-001
584382-001
37