Top cover
Description
Top cover (includes TouchPad and TouchPad cable, caps lock light board and cable, and top
cover bumper pads)
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
5.
Remove the hard drive (see
6.
Remove the memory cover (see
Remove the top cover:
1.
Remove the two front rubber feet (1). The computer feet are available in the Rubber Kit, spare part
number 592966-001.
2.
Remove the 17 Phillips PM2.5×6.0 screws (2) that secure the top cover to the computer.
48
Chapter 4 Removal and replacement procedures
Battery on page
35).
Hard drive on page
Memory module on page
37).
40).
Spare part number
592964-001