5.9.1 DC-DC Converter and Audio Board Shield
To remove the DC-DC converter/audio board shield, complete the following
procedures:
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.7.1).
3. Remove the RTC battery (Section 5.7.3).
4. Remove the top cover assembly (Section 5.9).
5. Remove the screws from the converter/audio board shield.
6. Remove the converter/audio board shield.
Figure 5-29. Removing the DC-DC Converter and Audio Board Shield
Removal and Replacement Procedures 5-31