HP ProSignia 120 Maintenance And Service Manual page 30

Categories by connection:
System Features—security, power, boot management
System Devices—keyboard, mouse, parallel and serial ports
ISA—ISA bus and connected devices
PCI—PCI bus and connected devices
PC Card—PC Card devices
Running Computer Setup
1. Turn on or restart the computer by clicking Start
computer.
2. Press F10 when the blinking cursor appears in the upper-right corner of the screen.
NOTE: If you a setup password is enabled, it must be used to access Computer Setup.
3. Click a language and press Enter.
4. Click Computer Setup and press Enter.
5. When you are finished, click Exit.
Exiting Computer Setup
1. Click Exit.
2. Select one of the following Exit options:
Save—Saves the new settings and exits Computer Setup.
NOTE: Some settings may not take effect until the computer is restarted.
Ignore—Exits Computer Setup and restores previous settings.
Cancel—Returns to Computer Setup.
2-8 Troubleshooting
Shut Down Restart the