Top Cover Assembly - HP ProSignia 120 Maintenance And Service Manual

5.9 Top Cover Assembly

To remove the top cover assembly, complete the following procedures:
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.7).
3. Remove the optical disc bay device (Section 5.7.4).
4. Remove the RTC battery (Section 5.7.3).
5. Complete steps 1 through 4 of the display assembly removal procedure (Section
5.8).
6. Remove the seven (7) screws holding the top and bottom of the base enclosure
together.
Figure 5-25. Removing the Top Cover Assembly Screws from the Bottom of the Unit
Removal and Replacement Procedures 5-27