Front Wheel - Yamaha XT660XS Owner's Manual

Front wheel

To remove the front wheel
WARNING
G It is advisable to have a Yamaha
dealer service the wheel.
G
Securely support the motor-
cycle so that there is no danger
of it falling over.
1. Loosen the front wheel axle pinch
bolts, then the wheel axle and the
brake caliper bolts.
XT660R
1. Wheel axle
2. Front wheel axle pinch bolt A
3. Front wheel axle pinch bolt B
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24360 XT660X
EAUM1761
EWA10820
1. Wheel axle
2. Front wheel axle pinch bolt A
3. Front wheel axle pinch bolt B
2. Lift the front wheel off the ground
according to the procedure on
page 6-33.
3. Remove the brake caliper by re-
moving the bolts.
1. Bolt
2. Brake caliper
CAUTION:
Do not apply the brake after the
wheel has been removed together
with the brake disc, otherwise the
brake pads will be forced shut.
4. Pull the wheel axle out, and then
To install the front wheel
1. Lift the wheel up between the fork
2. Insert the wheel axle.
3. Lower the front wheel so that it is
6-34
remove the wheel.
legs.
on the ground.
ECA11070
6
EAUM1811