Yamaha XT660XS Owner's Manual page 44

2. Place the cowling in the original
position, and then install the bolts
and spacers.
Cowling B
To remove the cowling
1. Remove the seat and panel B.
(See pages 3-12 and 6-5.)
2. Remove the bolts, remove the
quick fastener screws after turning
them 1/4 turn counterclockwise,
and then pull the cowling off at the
area shown.
1. Bolt
2. Quick fastener screw
PERIODIC MAINTENANCE AND MINOR REPAIR
To install the cowling
1. Place the cowling in the original
position, and then tighten the quick
fastener screws and install the
bolts.
EAUM1691
2. Install the panel.
3. Install the seat.
Panel A
To remove the panel
1. Remove the seat. (See page
3-12.)
2. Remove the bolts and the spacer,
and then pull the panel off at the
area shown.
1. Bolt
2. Spacer
To install the panel
1. Place the panel in the original posi-
EAUM1701
2. Install the seat.
6-6
tion, install spacer, and then install
the bolts.
6