Mounting Height - Parsun F115 BEX-T Owner's Manual

The information presented in this section is intended as reference only. Proper mounting

depends in part on experience and the specific boat and motor combination.
The mounting height of the outboard motor greatly affects your boat running efficiency. If the mounting
height is too high, cavitation tends to occur, thus reducing the propulsion. If the mounting height is too
low, the water resistance will increase and thereby reduce engine efficiency. Mount the outboard motor
so that the anti-cavitation plate is between the bottom of the boat and a level 25mm below it.
NOTE:
The optimum mounting height of the outboard motor is affected by the boat and motor
combination and the desired use. Test runs at a different height can help determine the
optimum mounting height. For further information, consult your "PARSUN" dealer or boat
manufacturer.
Check that the water level on the idle exhaust port is high enough to prevent water entry into
the power head, when water rise due to waves.

2.1.1 Mounting height

0～25mm
(0-1in)
11