Empire Comfort Systems DVP48FP30 Installation Instructions And Owner's Manual page 61

REMOTE CONTROL OPERATION INSTRUCTIONS
ACCENT LIGHT CONTROL
The light function controls the light by the dimmable light control.
To activate this function, use the Mode Button Figure 76a to
index to the Light icon. See Figures 89 and 90.
The intensity of the output can be adjusted through six levels.
Use the Up/Down Arrow Buttons Figure 76a to adjust the output
level. A single "beep" will confirm reception of the command.
OFF
OFF
39359-4-0320
Figure 89
Figure 90
CONTINUOUS PILOT/INTERMITTENT PILOT (CPI/IPI) SELECTION
With the system in "OFF" position press the MODE key Figure
76a to index to the CPI mode icon. See Figures 91 and 92.
Pressing the UP ARROW key will activate the Continuous Pilot
Ignition mode (CPI).
Pressing the DOWN ARROW key will return to IPI.
A single "beep" will confirm the reception of the command.
Figure 91
Figure 92
Page 61