Empire Comfort Systems DVP48FP30 Installation Instructions And Owner's Manual page 59

REMOTE CONTROL OPERATION INSTRUCTIONS
REMOTE FLAME CONTROL
The Proflame has six flame levels.
With the system ON and the flame level at the maximum in the
appliance, pressing the DOWN ARROW key once will reduce the
flame height by one step until the flame is turned OFF.
The UP ARROW key will increase the flame height each time it is
pressed.
If the UP ARROW key is pressed while the system is ON but the
flame is OFF, the flame will come ON in the high position.
Figure 80 - Flame OFF
Figure 81 - Flame Level 1
Figure 82 - Flame Level 5
39359-4-0320
Figure 83 - Flame Level Maximum
THERMOSTAT TRANSMITTER OPERATION
The Remote Control can operate as a room thermostat. The ther-
mostat can be set to a desired temperature to control the comfort
level in a room.
To activate the function, press the THERMOSTAT key. See Fig-
ure 76a. The LCD display on the Transmitter will change to show
that the room thermostat is "ON" and the set temperature is now
displayed. See Figure 84.
To adjust the set temperature, press the UP or DOWN ARROW
keys until the desired set temperature is displayed on the LCD
screen of the Transmitter.
Figure 84
Page 59