CHIEF FDP Series Installation Instructions

If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.
(2) FDP Pole-Mounting Bracket Half
(2) ¼-20 X 4.25" Hex Bolt
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
CAUTION!

Interface Bracket Installation:

1. See installation procedures accompanying your mounting bracket.

Optional Latching Flag Placement:

1. Remove Phillips head screw, Nylock nut and latching flag (see Figure 2).
2. Reposition latching flag and secure using Phillips head screw, Nylock nut.
Remove screw
and nut
8803-000033
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
INSTALLATION INSTRUCTIONS
FDP SERIES
SMALL FLAT PANEL DISPLAY
DUAL SCREEN POLE MOUNT
Exclusive Q2™ Mounting System
Prior to assembly, unpack carton completely and verify contents.
The FSP will fit on any 1/1/2" to 2" O.D. pipe including 1 ½"NPT.
Flat Panel Displays are Extremely Fragile.
If Monitor Uses a Screw Size Other Than M4 X 10mm (M4 X 20mm),
DO NOT USE M4 Screws Provided. Monitor Damage Could Occur.
Move latch
Figure 1
(2) ¼" Flat Washer
(8) 10-24 X 1.00 Thread Forming Screw
(8) ½" X ½" Nylon Spacer
Figure 2
01/26/04