Appliance Break-In; Wall Control; Led Control - Hearth and Home Technologies Outdoor Lifestyles ODLANAIG-48 Owners Manual Care And Operation

F. Appliance Break-in
Initial Break-in Procedure
When you light the appliance, you may notice that
it produces heat which does have an associated
odor or smell. This appliance should be run three
to four hours on the initial start-up. Turn it off and
let it cool completely.
WARNING! Risk of Fire or Burns! Provide
adequate clearance for service access. Due to
high temperatures, the appliance should be
located out of traffic and away from furniture
and draperies.
WARNING! DO NOT place combustible objects
in front of the appliance. High temperatures could
start a fire.
G. Wall Control
Wall Control Operation
The Lanai series appliance comes standard with
a rocker switch and two (2) button wall control
panel . See Figure 3.3
On/Off – This switch toggles the On/Off function
of the main burner
• On Position: Appliance will ignite main burner
and run continuously (wall rocker switch).
• Off Position: Appliance main burner off
10
Outdoor Lifestyles by Hearth & Home Technologies Inc. • Lanai 48/60 Owner's Manual • 4111-900 Rev. C • 06/21
H. LED Control
• Multi-colored LED lights – These two (2)
buttons turn LEDs ON (HI/MED/LO) and OFF
function and cycle through the color selection.
1. Color Fade – This setting will cycle through the colors
shown below at a normal rate.
2. Color Fade Slow – This setting will cycle through
the colors shown below at a slower rate.
3. Pause Color – This setting will pause the slow color
fade at any color in the color wheel.
4. Solid Color Selection – This setting will cycle
through each color in order:
• Blue
• Violet
• Red
• Yellow
• Green
• Cyan
• White
CAUTION! Risk of Electric Shock! Avoid
touching wires and electrical components in
appliance control cavity.
FLAME
ON/OFF
Figure 3.3. Wall Control Switch
LIGHT
ON/OFF
COLOR
SELECTION