Billion BiPAC 6200WZL R2 User Manual page 60

Wi-Fi Network Setup
PIN Method: Configure AP as Registrar
1. Jot down the client's Pin (e.g. 16837546).
2. Enter the Enrollee's PIN number and then press Start.
3. Launch the wireless client's WPS utility (eg. Ralink Utility). Set the Configure Mode as Enrollee,
press the WPS button on the top bar, select the AP (eg. wlan-ap) from the WPS AP List column.Then
press the PIN button located on the middle left of the page to run the scan.
56