Billion BiPAC 6200WZL R2 User Manual page 127

Dual-wan 3.75g wireless-n 150mbps broadband firewall router
Hide thumbs Also See for BiPAC 6200WZL R2:
Table of Contents

Advertisement

The DSCP Mapping Table
Rate Type: 2 types are provided:
Limited (Maximum): Specify a limited data rate for this policy. It also is the maximal rate for
this policy. As above FTP server example, you may want to "throttle" the outgoing FTP speed to 20%
of 256K and limit to it, you may use this type.
Guaranteed (Minimum): Specify a minimal data rate for this policy. For example, you want to
provide a guaranteed data rate for your outside customers to access your internal FTP server with, say
at least, 20% of your total bandwidth. You can use this type. Then, if there is available bandwidth that
is not used, it will be given to this policy by following priority assignment.
Ratio: Assign the data ratio for this policy to be controlled. For examples, we want to only allow 20%
of the total data transfer rate for the LAN-to-WAN direction to be used for FTP server. Then we can
specify here with data ratio = 20.
Priority: Specify the priority for the bandwidth that is not used. For examples, you may specify two
different QoS policies for different applications. Both applications need a minimal bandwidth and need
more bandwidth, beside the assigned one, if there is any available/non-used one available. So, you
may specify which application can have higher priority to acquire the non-used bandwidth.
High
Normal: The default is normal priority.
Low
For the sample priority assignment for different policies, it is served in a First-In-First-Out way.
Internal IP Address: The IP address values for Local LAN machines you want to control. (For IP
packets from LAN to WAN, it is the source IP address. For IP packages from WAN to LAN, it is the
destination IP address.)
Internal Port: The Application port values for local LAN machines you want to control. (For TCP/UDP
DSCP Mapping Table
3G Router
Disabled
Best Effort
Premium
Gold service (L)
Gold service (M)
Gold service (H)
Silver service (L)
Silver service (M)
Silver service (H)
Bronze service (L)
Bronze service (M)
Bronze service (H)
Standard DSCP
None
Best Effort (000000)
Express Forwarding (101110)
Class 1, Gold (001010)
Class 1, Silver (001100)
Class 1, Bronze (001110)
Class 2, Gold (010010)
Class 2, Silver (010100)
Class 2, Bronze (010110)
Class 3, Gold (011010)
Class 3, Silver (011100)
Class 3, Bronze (011110)
123

Advertisement

Table of Contents
loading

Table of Contents