Printing Problems; Serial, Parallel, And Usb Problems - HP OmniBook XE3 Reference Manual

Solving Problems with Your Computer
Troubleshooting Techniques

Printing problems

For most printing problems, use the Print Troubleshooter in Windows Help.
If a serial or parallel printer doesn't print
Check that you are using a proper cable or cable adapter, and that the printer is on.
Check for paper in the printer or other printer errors.
Make sure the printer cable is securely attached at both ends.
If the left edge of printed output is missing
If the printer you are using is a 600-dpi (dots per inch) printer, try selecting a
compatible printer driver for a 300-dpi printer. For example, for a 600-dpi
HP LaserJet printer, try using the HP LaserJet IIIsi driver (300-dpi). Certain
applications may not work properly with 600-dpi printers.

Serial, parallel, and USB problems

If a serial mouse doesn't work
First, make certain you completely followed the manufacturer's installation
instructions to install the mouse properly.
Check the port connection to see if it's loose.
Check settings in BIOS Setup.
1. Click Start, Shut Down, Restart.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. From the System Devices menu, check that Serial Port is enabled.
If you standby and resume, reboot the computer to reenable the mouse.
If a serial modem doesn't work properly
In Windows Help use the Modem Troubleshooter.
Check the port connection to see if it's loose.
106 Reference Guide