HP OmniBook XE3 Reference Manual page 121

Television Type
Base Memory
Extended Memory
CPU Serial Number
System Devices Menu
PS/2 Pointing Device
External Fn key
IDE Controller
FDD Controller
Serial Port
Base I/O address
Infrared Port
Mode
NTSC or PAL standard.
Shows the system memory size.
Shows the extended memory size.
When enabled, reports Intel CPU
serial number to application software.
When an external PS/2 mouse is
connected, enables internal pointing
device also (Both) or disables it
(External Only).
Enables or disables Left Ctrl+Left Alt
on external keyboard to simulate
notebook keyboard Fn key.
Configures local bus IDE controller to
enable primary channel (Primary),
primary and secondary channel
(Both), or neither (Disabled).
Enables or disables floppy disk drive
controller.
Sets how the serial port is
configured—by the user (Enabled),
automatically (Auto), or inactive
(Disabled).
Sets the I/O address and interrupt.
Sets how the infrared port is
configured—by the user (Enabled),
automatically (Auto), or inactive
(Disabled).
When IR port is enabled, sets the
hardware to support SIR (Standard IR)
or FIR (Fast IR) infrared
communications.
Specifications and Regulatory Information
Hardware and Software Specifications
NTSC
640KB
Detected
automatically.
Enabled
Default
Both
Enabled
Both
Enabled
Enabled
3F8 IRQ4
Disabled
SIR
Reference Guide 121