Step 2: Connect Ac Power - HP OmniBook 500 Startup Manual

CAUTION
Important

Step 2: Connect AC power

Use only the HP AC adapter included with your computer (or other approved
adapter). Using any other AC adapter could damage the computer and may void
your warranty (see the warranty statement in this manual).
If you have an expansion base, do not dock your computer in it until after the computer
boots up for the first time.
• Plug in the AC adapter, and connect it to the AC adapter jack on the back of the
computer. The computer's battery then starts charging.
While the battery is charging, you can continue with step 3.
Getting Started with Your HP Notebook
Setting Up Your Computer
Startup Guide 21