To Respond To A Low-Battery Warning - HP OmniBook 500 Startup Manual

Note
From the expansion base status panel
• Press the status panel button several times to display the percent charge remaining for
each secondary battery.
On the battery
1. Remove the battery from the computer (see "Step 1: Install the battery" on page 19)
or from the expansion base.
2. Press the contact pad on the back of the battery. The number of lights that turn on
indicates the remaining charge (each light represents 20% of a full charge).

To respond to a low-battery warning

The computer automatically alerts you when the battery power drops to a critically low
level. If you do not restore power within a short time, the computer then goes into
Hibernate mode.
Once the computer enters Hibernate mode in this way, you won't be able to turn it on
again until you restore power by doing one of the following:
• Replace the battery with a charged one. See "Step 1: Install the battery" on page 19.
• Plug in the AC adapter.
• Install a charged secondary battery in one of the expansion base's plug-in module
bays.
If you plug in the AC adapter, you can continue to work while your battery recharges.
Batteries and Power Management
Using Battery Power
Startup Guide 37