Step 2: Connect Ac Power - HP Omnibook XE4000 series Startup Manual

CAUTION
Important

Step 2: Connect AC power

Use only the HP AC adapter included with your computer (or other approved
adapter that meets the power requirements of the computer).
If "75W" is printed below the AC adapter socket on the computer, do not use a 60-
watt, 3.16-amp adapter, such as HP F1454A or F1781A, and do not use DC adapter
accessories F1455A and F2297A.
Using the wrong AC adapter could damage the computer or adapter and may void
your warranty (see "Hewlett-Packard Limited Warranty Statement" on page 57).
• Plug the AC adapter into the computer and connect the power cord to the AC adapter,
then plug the power cord into a wall outlet. The computer's battery then starts
charging.
When unplugging the AC adapter, unplug the power cord from the outlet first.
While the battery is charging, you can continue with step 3.
Getting Started with Your HP Notebook
Setting Up Your Computer
Startup Guide 19