To Connect The Floppy Disk Drive - HP OmniBook 500 Startup Manual

Getting Started with Your HP Notebook
Setting Up Your Computer

To connect the floppy disk drive

If you don't have an expansion base, you can connect the floppy disk drive to a USB
port.
• Connect the F2101A USB floppy cable directly to the floppy drive and to the USB
port.
If you have an expansion base, you can insert the floppy drive in a module bay—see "To
replace a plug-in module" on page 46.
You cannot use the USB floppy cable to connect any other type of drive module, such as
a CD-ROM or DVD drive. The USB floppy cable is for floppy drives only.
26 Startup Guide