1. Manuals
  2. Brands
  3. LTS Manuals
  4. DVR
  5. 0700 Series
  6. Quick operation manual

LTS 0700 Series Quick Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Operation Guide of
0700/8800/8700 Series NVR
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com

Advertisement

Table of Contents
loading

Related Manuals for LTS 0700 Series

Summary of Contents for LTS 0700 Series

  • Page 1 Quick Operation Guide of 0700/8800/8700 Series NVR Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...

  • Page 2: Table Of Contents

    Quick Operation Guide of 0700/8800/8700 Series NVR TABLE OF CONTENTS NVR Pre-Installation ..........................2 NVR Installation ............................2 Hard Disk Installation ..........................2 Front Panel ............................... 5 Rear Panel............................... 12 Peripheral Connections ......................... 15 Wiring of Alarm Input / Output ........................ 15 Using of Alarm Connectors ........................

  • Page 3: Nvr Pre-Installation

    Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to 8700, 8800 and 0700 series NVR. NVR Pre-Installation The 0700/8800/8700 series NVR are highly advanced surveillance equipment that should be installed with care.
  • Page 4 Quick Operation Guide of 0700/8800/8700 Series NVR 3. Press the buttons on the panel of two sides and open the front panel. 4. Insert the hard disk along the slot until it is placed into position. 5. Repeat the above steps to install other hard disks onto the NVR. After having finished the installation of all hard disks, close the front panel and lock it with the key again.
  • Page 5 Quick Operation Guide of 0700/8800/8700 Series NVR Steps (for 8700 and 8800): Remove the cover from the NVR by unfastening the screws on the rear and side panel. Connect one end of the data cable to the motherboard of NVR and the other end to the HDD. 3.

  • Page 6: Front Panel

    Quick Operation Guide of 0700/8800/8700 Series NVR Front Panel 0700 Series Name Function Description ALARM Turns red when a sensor alarm is detected. Ready LED is normally blue, indicating that the device is READY functioning properly. Turns blue when device is controlled by an IR remote.
  • Page 7 Quick Operation Guide of 0700/8800/8700 Series NVR Name Function Description It is also used to turn audio on/off in the Playback mode. The button is used to enter the Playback mode. PLAY/AUTO It is also used to auto scan in the PTZ Control menu. ZOOM+ Zoom in the PTZ camera in the PTZ Control setting.
  • Page 8 Quick Operation Guide of 0700/8800/8700 Series NVR Name Function Description In PTZ control mode, it can control the movement of the PTZ camera. The ENTER button is used to confirm selection in any of the menu modes. It can also be used to tick checkbox fields. ENTER In Playback mode, it can be used to play or pause the video.
  • Page 9 Quick Operation Guide of 0700/8800/8700 Series NVR 8800 Series Name Function Description POWER Turns green when NVR is powered up. READY The LED is green when the device is running normally. The light is green when the IR remote control is enabled; The light is red when the function of the composite keys (SHIFT) Status STATUS...
  • Page 10 Quick Operation Guide of 0700/8800/8700 Series NVR Name Function Description The F1 button when used in a list field will select all items in the list. In PTZ Control mode, it will turn on/off PTZ light and when the image is zoomed in, the key is used to zoom out. Enter numeral “3”;...
  • Page 11 Quick Operation Guide of 0700/8800/8700 Series NVR 8716: Name Function Description POWER: the POWER LED turns green when NVR is powered READY: The LED is green when the device is running normally. STATUS: 1.The light is green when the IR remote control is enabled;...
  • Page 12 Quick Operation Guide of 0700/8800/8700 Series NVR Open the manual record interface. Enter numeral “8”; Enter letters “TUV”; 8/TUV/PTZ Access PTZ control interface. Enter numeral “9”; Enter letters “WXYZ”; 9/WXYZ/PREV Multi-channel display in live view. Enter numeral “0”; Shift the input methods in the editing text field. (Upper and lowercase, alphabet, symbols or numeric input).

  • Page 13: Rear Panel

    Quick Operation Guide of 0700/8800/8700 Series NVR Rear Panel 0700/0700-R 8800 Item Description VIDEO OUT BNC connector for video output. CVBS AUDIO BNC connector for audio output. This connector is synchronized with CVBS video output. VGA AUDIO OUT BNC connector for audio output. This connector is synchronized with VGA video output.
  • Page 14 Quick Operation Guide of 0700/8800/8700 Series NVR 8800-P8 8800-P16 Item Description VIDEO OUT BNC connector for video output. CVBS AUDIO OUT BNC connector for audio output. This connector is synchronized with CVBS video output. VGA AUDIO OUT BNC connector for audio output. This connector is synchronized with VGA video output.
  • Page 15 Quick Operation Guide of 0700/8800/8700 Series NVR 8716 Item Description VIDEO OUT BNC connector for video output. AUDIO OUT BNC connector for audio output. AUDIO IN BNC connector for audio input. (Also for two-way audio) RS-232 Interface Connector for RS-232 devices. DB9 connector for VGA output.

  • Page 16: Peripheral Connections

    Quick Operation Guide of 0700/8800/8700 Series NVR Peripheral Connections Wiring of Alarm Input / Output The alarm input/output interface of the NVR is shown as below: The alarm input is an open/closed relay. If the input is not an open/closed relay, follow the connection diagram below: Relay alarm input...

  • Page 17: Controller Connection

    Quick Operation Guide of 0700/8800/8700 Series NVR Controller Connection To connect a controller to the NVR: Disconnect pluggable block from the KB terminal block. Unfasten stop screws from the KB D+, D- pluggable block, insert signal cables into slots and fasten stop screws.

  • Page 18: Specifications

    Quick Operation Guide of 0700/8800/8700 Series NVR Specifications Specifications of 0700 Model 0708 0716 0732 0764 IP video input 8-ch 16-ch 32-ch 64-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF resolution /QCIF Main stream: 25 fps (P) / 30 fps (N)
  • Page 19 Quick Operation Guide of 0700/8800/8700 Series NVR Specifications of 0700-R Model 0708-R 0716-R 0732-R 0764-R IP video input 8-ch 16-ch 32-ch 64-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF resolution /QCIF Main stream: 25 fps (P) / 30 fps (N)
  • Page 20 Quick Operation Guide of 0700/8800/8700 Series NVR Specification of 8800 Model 8808 8816 8832 IP video input 8-ch 16-ch 32-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF resolution /QCIF Main stream: 25 fps (P) / 30 fps (N)
  • Page 21 Quick Operation Guide of 0700/8800/8700 Series NVR Specification of 8800-P8 Model 8808-P8 8816-P8 8832-P8 IP video input 8-ch 16-ch 32-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF resolution /QCIF Main stream: 25 fps (P) / 30 fps (N)
  • Page 22 Quick Operation Guide of 0700/8800/8700 Series NVR Specification of 8800-P16 Model 8816-P16 8832-P16 IP video input 16-ch 32-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF /QCIF resolution Main stream: 25 fps (P) / 30 fps (N) Frame rate Sub-stream: 25 fps (P) / 30 fps (N)
  • Page 23 Quick Operation Guide of 0700/8800/8700 Series NVR Specifications of 8700 Model 8716 IP video input 16-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) (Two-way audio) Audio in Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF resolution /QCIF Main stream: 25 fps (P) / 30 fps (N) Frame rate Sub-stream: 25 fps (P) / 30 fps (N)
  • Page 24 Quick Operation Guide of 0700/8800/8700 Series NVR Specifications of 8700-P8 Model 8708-P8 8716-P8 IP video input 8-ch 16-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) (Two-way audio) Audio in Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF resolution /QCIF Main stream: 25 fps (P) / 30 fps (N)

  • Page 25: Hdd Storage Calculation Chart

    Quick Operation Guide of 0700/8800/8700 Series NVR HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit Rate Storage Used 128K 160K 192K 224K...

  • Page 26: Menu Operation

    Quick Operation Guide of 0700/8800/8700 Series NVR Menu Operation Menu Structure The menu structure of the 0700/8800/8700 Series NVR: The menu structure of the 0700-R Series NVR: Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...

  • Page 27: Startup And Shutdown

    Quick Operation Guide of 0700/8800/8700 Series NVR Startup and Shutdown Proper startup and shutdown procedures are crucial to expanding the life of the NVR. To start your NVR: 1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device.
  • Page 28 Quick Operation Guide of 0700/8800/8700 Series NVR Login Window 3. Enter the admin password. By default, the password is 12345. 4. To change the admin password, check the New Admin Password checkbox. Enter the new password and confirm the password in the given fields. 5.
  • Page 29 Network Configuration Note: Dual-NIC is only supported by 0700 series device. And for 8700/8800-P8 series NVR, the internal NIC IPv4 address should be configured for the cameras connecting to the PoE network interface of the NVR. 7. Click Next button after you configured the network parameters, which takes you to the Array Management window (supported by 0700-R series only).
  • Page 30 Quick Operation Guide of 0700/8800/8700 Series NVR Array Management 8. Click Next button after you configured the network parameters, which takes you to the HDD Management window. HDD Management 9. To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD. 10.
  • Page 31 Quick Operation Guide of 0700/8800/8700 Series NVR Search for IP Cameras 12. Click Next button. Configure the recording for the searched IP Cameras. Record Settings 13. Click Copy to copy the settings to other channels. Copy Record Settings Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...

  • Page 32: Live View

    Quick Operation Guide of 0700/8800/8700 Series NVR 14. Click OK to complete the startup Setup Wizard. Live View Some icons are provided on screen in Live View mode to indicate different camera status. These icons include: Live View Icons In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the record and alarm in the channel, so that you can find problems as soon as possible.

  • Page 33: Configuring Basic Parameters Of Ip Cameras

    Quick Operation Guide of 0700/8800/8700 Series NVR Camera Settings Interface Check the checkbox of certain cameras to be added. Click Quick Add to add the camera. To add other IP cameras: On the left side of the interface, you can enter the IP address, protocol, management port, and other information of the IP camera to be added.

  • Page 34: Ptz Control

    Quick Operation Guide of 0700/8800/8700 Series NVR Edit the Parameters Click apply to save the settings and click OK to exit the editing interface. To edit more parameters: Click the icon. Network Configuration of the Camera You can edit the network information and the password of the camera. Click Apply to save the settings and click OK to exit the interface.

  • Page 35: Ptz Settings

    Quick Operation Guide of 0700/8800/8700 Series NVR PTZ Settings Steps: Enter the PTZ Settings interface. Menu >Camera> PTZ Camera Settings Interface Choose the camera for PTZ setting next to Camera label. Enter the parameters of the PTZ camera. Note: All the parameters should be exactly the same as the PTZ camera parameters. Click Copy if you want to configure same settings to other PTZ cameras.

  • Page 36: Playback

    Quick Operation Guide of 0700/8800/8700 Series NVR Icon Description Icon Description Icon Description Image 3D-Zoom Preset Centralization Patrol Pattern Menu Previous item Next item Start pattern/patrol Stop the patrol or Minimize Exit pattern movement windows Playback Play back the record files of a specific channel in the live view menu. Channel switch is supported. Instant playback by channel Choose a channel under live view using the mouse and click the button in the shortcut operation menu.

  • Page 37: Backup

    Quick Operation Guide of 0700/8800/8700 Series NVR Right-click Menu under Live View Front Panel: press PLAY button to play back record files of the channel under single-screen live view. Under multi-screen live view, record files of the top left channel (not masked) will be played back. Note: pressing numerical buttons will switch playback to related channels during playback process.
  • Page 38 Quick Operation Guide of 0700/8800/8700 Series NVR Quick Export Interface Enter Export interface, choose backup device and press Export button to start exporting. Quick Export using USB1-1 Check backup result. Choose the record file in Export interface and press button to check it.

  • Page 39: Accessing By Web Browser

    Quick Operation Guide of 0700/8800/8700 Series NVR Accessing by Web Browser Logging In If the device has successfully connected to the network, you can get access to the device via web browser. Open web browser, input the IP address of the device and then press Enter. The login interface appears. Input the user name and password, and click the Login button.

  • Page 40: Recording

    Quick Operation Guide of 0700/8800/8700 Series NVR Start Live View Steps: In the live view window, select a playing window by clicking the mouse. Double-click a camera from the device list to start the live view. You can click the button on the toolbar to start the live view of all cameras on the device list.

  • Page 41: Playback

    Quick Operation Guide of 0700/8800/8700 Series NVR Playback Interface Introduction ① Camera List: Displays the list of cameras and the playing status of each camera. ② Playback Window: Displays the video of camera. ③ Play Control Bar: Play control operations are supported. ④...

  • Page 42: Log

    Quick Operation Guide of 0700/8800/8700 Series NVR You can view and export the log files at any time, including operation, alarm, exception and information of device. Before you start The Log function can be realized only when the device is connected with HDD or network disk. And make sure the HDD or network disk has been initialized for the first time to use.

This manual is also suitable for:

8800 series8700 series0708071607320764 ... Show all

Table of Contents