Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to the following models: 7200-FH Series, 7200-WH Series, 7200A-WH Series, 7200-HV Series, 7200A-HV Series 7300-FH Series, 7300-WH Series, 7300A--WH Series, DVR Pre-Installation This Series DVR is highly advanced surveillance equipment that should be installed with care.
Page 3
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR 3. Connect the HDD to the motherboard of the DVR with the included data cable. 4. Connect the power cable to the HDD. 5. Re-install the cover of the DVR and fasten screws.
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Front Panel 7204-FH/WH: 7208/16-FH/WH: 7204/08/16-HV: 7204/08/16A-HV:...
Page 5
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Table 1 Description of Control Panel Buttons Name Function Description POWER: the POWER indicator turns green when NVR is powered up. READY: The indicator light is green when the device is running normally. STATUS: 1.The light is green when the IR remote control is enabled;...
Page 6
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Name Function Description Enter numeral “9”; 9/WXYZ/PREV: Enter letters “WXYZ”; Multi-channel display in live view. Enter numeral “0”; Shift the input methods in the editing text field. (Upper and 0/A: lowercase, alphabet, symbols or numeric input). Double press the button to switch the main and auxiliary output.
Page 7
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR 7300-FH/WH: The front panel of 7300-FH/WH is shown below: Table 2 Description of Control Panel Buttons Name Function Description POWER ON/OFF Power on/off switch. IR Receiver Receiver for IR remote control. Connect to USB mouse or USB flash memory devices. DVD-ROM Slot for DVD-ROM.
Page 8
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Enter letters “PQRS”; Manual record, for direct access to manual record interface; manually enable/disable record. Enter numeral “8”; Enter letters “TUV”; 8TUV/PTZ Access PTZ control interface. Enter numeral “9”; Enter letters “WXYZ”; 9WXYZ/PREV Multi-camera display in live view;...
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Rear Panel 7204-FH/HV: 7204-WH : 7216-HV Note: The rear panels of 7208-HV provide 8 video input interfaces. 7216A-HV: Note: The rear panels of 7204A-HV and 7208A-HV provide 4, 8 video input interfaces. 7216B-HV: Note: The rear panels of 7204B/7208B-HV provide 4, 8 video/audio input interfaces.
Page 10
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR 7216-FH Note: The rear panels of 7208-FH provide 8 video input interfaces. 7216-WH Note: The rear panels of 7208-WH provide 8 video/alarm input interfaces. 7216A-WH : Note: The rear panels of 7204A-WH and 7208A-WH provide 4/8 video/Audio input interfaces. Table 3 Description of Rear Panel Item Description...
Page 11
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR 7304-FH and 7304-WH: 7308-FH and 7308-WH: 7316-FH and 7316-WH: Table 4 Description of Rear Panel Item Description VIDEO IN BNC connector for analog video input. MAIN VIDEO OUT BNC connector for video output. SPOT VIDEO OUT BNC connector for spot video output.
Page 12
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR 7332-FH, 7332-WH: 10 11 12 14 15 16 Note: 7324-FH/WH/HH models provide 24 video input interfaces on the rear panel. 7332A-WH Table 5 Description of Rear Panel Item Description MAIN VIDEO OUT BNC connector for video output.
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Peripheral Connections Note: Alarm input/output connections are valid for the 7300 and 8100 models only. Connecting to Alarm Input / Output Device The alarm input is an open/closed relay. If the input is not an open/closed relay, follow the connection diagram below: To connect to an AC/DC load, use the following diagram: For DC load, JP4 can be used within the limit of 12V/1A safely.
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit Rate Storage Used 128K 160K 192K...
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Menu Operation Menu Structure The menu structure of the 7200-FH/WH series DVR is shown as below: Menu Playback Export Manual Record Camera Shutdown Configuration Maintenance Normal Normal Record General Schedule General Logout Lock System Info Event...
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Shutting down the device: Steps: 1. Enter the Shutdown menu. Menu > Shutdown 2. Click the Shutdown button to enter the following dialog box: 3. Click the Yes button. The following message box pops up: 4.
Page 26
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR 3. Click Next button on the Wizard window to enter the Login window. Enter the admin password. By default, the password is 12345. To change the admin password, check the New Admin Password checkbox. Enter the new password and confirm the password in the given fields.
Page 27
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR You can enable the DHCP to automatically obtain an IP address and other network settings from that server. Note: The 7200-FH/WH and 7200-HV models provide one 10M/100Mbps self-adaptive network interface, the 7300-FH/WH models provide one 10M/100M/1000Mbps self-adaptive network interface, 6.
Page 28
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Click Copy to copy the record settings of the current camera to other camera (s) if needed. Click OK to return to the Record Settings window. Click OK to complete the startup Setup Wizard.
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Live View Some icons are provided on screen in Live View mode to indicate different camera status. These icons include: Live View Icons In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the record and alarm in the channel, so that you can find problems as soon as possible.
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Using an Auxiliary Monitor Certain features of the Live View are also available while in an Aux monitor. These features include: • Single Screen: Switch to the single full screen by choosing channel number from the dropdown list. •...
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Record You can use the right-click menu in live view mode to configure recording for all channels. 1. In the live view mode, use the mouse to right-click on the window to access the following menu: 2.
Page 32
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Playback by channel Steps: Enter the Playback menu. Mouse: right click a channel in live view mode and select Playback from the menu. Right-click Menu under Live View Front Panel: press PLAY button to play back record files of the channel under single-screen live view. Under multi-screen live view, record files of the top left channel (not masked) will be played back.
Page 33
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Playback Interface Just check the channel or channels if you want to switch playback to another channel or execute simultaneous playback of multiple channels. Export Recorded files can be backed up to various devices, such as USB flash drives, USB HDDs or a DVD writer. Steps: Enter Video Export interface.
Page 34
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Quick Export using USB1-1 Checkup of Quick Export Result Using USB1-1...
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Accessing by Web Browser Logging In If the device has successfully connected to the network, you can get access to the device via web browser. Open web browser, input the IP address of the device and then press Enter. The login interface appears. Input the user name and password, and click the Login button.
Page 36
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR modified. Start Live View Steps: In the live view window, select a playing window by clicking the mouse. Double-click a camera from the device list to start the live view. You can click the button on the toolbar to start the live view of all cameras on the device list.
Page 37
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR Optionally, check the checkboxes of other cameras to copy the settings to. Click Save to validate the above settings. Playback Interface Introduction ① Camera List: Displays the list of cameras and the playing status of each camera. ②...
Page 38
Quick Operation Guide of -7200/7300FH/WH/ HV Series DVR The color of the video on the progress bar stands for the different video types. You can view and export the log files at any time, including operation, alarm, exception and information of device.