Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LTS LTD8316M-ET
Summary of Contents for LTS LTD8316M-ET
- Page 1 Digital Video Recorder Quick Start Guide...
- Page 2 Digital Video Recorder Quick Start Guide Quick Start Guide About this Manual This Manual is applicable to Turbo HD Digital Video Recorder (DVR). The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
- Page 3 Digital Video Recorder Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
-
Page 4: Symbol Conventions
Digital Video Recorder Quick Start Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. -
Page 5: Chapter 2 Installation And Connections
Digital Video Recorder Quick Start Guide Rear Panel Interfaces Description The rear panel interfaces vary with different models. Refer to Table 1-1 for the common interfaces description of rear panels. Table 1-1 Common Interfaces Description of Rear Panels Item Description Item Description BNC interface for Turbo HD... -
Page 6: Hdd Installation
Digital Video Recorder Quick Start Guide 2.2 HDD Installation For DVR that has not been pre-installed HDD, it requires to install HDD for storage. Before you start Ensure power is disconnected. Prepare a factory recommended HDD, and cross screwdriver. 2.2.1 Bracket Installation Bracket installation is applicable when it requires to remove the device cover, and install HDD on the internal bracket. -
Page 7: Rs-485 And Controller Connection
Digital Video Recorder Quick Start Guide Figure 2-4 Fix Mounting Ear Figure 2-5 Open Front Panel Figure 2-6 Insert HDD 2.2.3 Fix-on-Bottom Installation Fix-on-bottom installation is applicable when it requires to install the HDD at the internal bottom. Step 1 Unfasten screws on each panel to remove the device cover. Refer to Figure 2-7. Step 2 Connect the data cable and power cable. -
Page 8: Chapter 3 Menu Operation
Digital Video Recorder Quick Start Guide Figure 2-10 Controller Connection Chapter 3 Menu Operation 3.1 Startup Proper startup is crucial to expand the life of DVR. It is HIGHLY recommended to use an Uninterruptible Power Supply (UPS) with the device. Step 1 Plug power supply into an electrical outlet. -
Page 9: Set Unlock Pattern
Digital Video Recorder Quick Start Guide Step 3 Enter the password in Create Channel Default Password to activate the network camera(s) connected to the device. Step 4 Click OK to save the password and activate the device. Figure 3-1 Set Admin Password What to do next: ... -
Page 10: User Login
Digital Video Recorder Quick Start Guide Figure 3-2 Draw the Unlock Pattern 3.4 User Login You have to log in to the device before operating the menu and other functions. Step 1 Select User Name. Step 2 Enter password for the selected user. Step 3 Click OK to log in. -
Page 11: Network Settings
Digital Video Recorder Quick Start Guide Figure 3-3 Signal Input Status The interface of different models may vary. Step 3 (Optional) You can enable 5 MP Long Distance Transmission for the Turbo HD and AHD signal input. 1) Click 2) Check the channel(s) to enable 5 MP long distance transmission. 3) Click OK. -
Page 12: Add Ip Cameras
Step 5 Click Apply. What to do next: After configuration, you can access and manage your devices through LTS connect app or website. 3.8 Add IP Cameras Before you can get live video or record the video files, you should add network cameras to the device. -
Page 13: Live View
Digital Video Recorder Quick Start Guide Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please refer to the User Manual for activating the inactive IP camera. Step 1 Go to Camera > IP Camera. Step 2 Click Custom Add. - Page 14 Digital Video Recorder Quick Start Guide 3.11 Playback The recorded video files and pictures on HDD can be played back. Refer to the user manual for details of each playback mode. Step 1 Go to Playback. Step 2 Check the channel(s) in the channel list. Step 3 Double click a date on the calendar.
-
Page 15: Chapter 4 Accessing By Web Browser
Digital Video Recorder Quick Start Guide Chapter 4 Accessing by Web Browser You can get access to the device via web browser. The following web browsers are supported: Internet Explorer 6.0, Internet Explorer 7.0, Internet Explorer 8.0, Internet Explorer 9.0, Internet Explorer 10.0, Apple Safari, Mozilla Firefox, and Google Chrome.